This valve delete kit is a clean and simple way to seal your factory connectors while allowing you the fun of having the valves disconnected and kept fully open at all times with no risk of damage. It is an essential piece of kit for all owners looking to do this mod without wanting to risk any damage to their car. The downside to disconnecting the valves is that you expose sensitive components to the elements. The valve motors are pricey and damaging them means you will need to replace them.
Both connectors have been thoroughly sealed with automotive grade silicone; it is air tight, water tight, and grime proof. The kit can be installed in a few very simple minutes with the only tool required being clippers or scissors. No jacking up the car or driving up on ramps required for this mod, just simply lay down and you have full access to everything. Since this is an OEM fitment kit that means it can be removed and reinstalled at any time as many times as you wish, it is 100% reusable!
Installation Difficulty: 1/10
All items included are as follows: $25 SHIPPED anywhere in the US
-1 female connectors for OEM wiring
-1 Male connectors for Valve socket
-2 black zip ties
Fitment Guide:
-All F2x 228, 235
-All F3x 328, 335
-All F3x 428, 435
-All F8x M3/4 (requires 2 kits, PM for Pricing)
Pros:
-No risk of damage!
-Perfect for leased or owned!
-Unlimited Reusability!
-Competitively Priced!
-Louder exhaust note!
Cons:
NONE!
I will ship WORLDWIDE, additional shipping charges may apply outside the US so PM me for a quote. I can accept PayPal or any major credit cards now! Simply PM me with your email address and I can send you an invoice ASAP!
It really does only take a few minutes to install; below you will find a video showing how simple and quickly this kit can be installed/removed.
At this point Im sure you're ready to see some pictures so here we go.
[IMG]http://ift.tt/1JIc7Fi[/IMG]
If you have any questions pertaining this kit please feel free to PM me and I will get back to you as quickly as possible!
BELOW INSTRUCTIONS ARE FOR THE F80/2 M3/4! The valves disconnect the same way and the kit installs very similarly.
Be sure the valves are in the open position before disconnecting the plugs and installing this kit or your valves will stay shut and be unable to open!
Installation Instructions Below:
This is how you will find your factory wiring (passeneger side of vehicle shown, driver is a mirror image essentially).
[IMG]http://ift.tt/1JIc5NC[/IMG]
In order to disconnect the factory plug you need to reach on top and depress a small lever and it will release and pull back. You can see the small lever you need to push on in my install video above.
This is what it all looks like disconnected.
[IMG]http://ift.tt/1NTQAzM[/IMG]
Next step is to simply install the plug into the valve, here we will be using the male plug provided (shorter of the two). This is done by sliding it in until you feel the latch click and it lock in place. The plug will only fit one way, do not force anything, if it doesn't feel right flip it over and attempt again.
[IMG]http://ift.tt/1NTQyYA[/IMG]
Now that the valve is taken care of we need to tie up the loose connector. First simply slide the female connector (Longer of the two) into the factory plug. This will also only fit one way so do not force anything, just try both ways and you will very clearly feel which is right.
[IMG]http://ift.tt/1NTQAQ2[/IMG]
Now that the wiring is sealed up all that is left to do is use the provided zip ties to keep the wiring from dangling and flapping around. Simply fold the wiring back on itself and tie the two together. I felt that left the plug a little floppy so I folded that back and zip tied it to the wiring to keep everything tight and together. Trim zip ties accordingly once everything is secured.
[IMG]http://ift.tt/1NTQyYC[/IMG]
At this point we are all done and can admire our work. Its nice to enjoy the fun this cheap mod can provide without the risk of damaging sensitive electronic components.
[IMG]http://ift.tt/1NTQyYE[/IMG]
Repeat the same on the other side and you're all done.
Both connectors have been thoroughly sealed with automotive grade silicone; it is air tight, water tight, and grime proof. The kit can be installed in a few very simple minutes with the only tool required being clippers or scissors. No jacking up the car or driving up on ramps required for this mod, just simply lay down and you have full access to everything. Since this is an OEM fitment kit that means it can be removed and reinstalled at any time as many times as you wish, it is 100% reusable!
Installation Difficulty: 1/10
All items included are as follows: $25 SHIPPED anywhere in the US
-1 female connectors for OEM wiring
-1 Male connectors for Valve socket
-2 black zip ties
Fitment Guide:
-All F2x 228, 235
-All F3x 328, 335
-All F3x 428, 435
-All F8x M3/4 (requires 2 kits, PM for Pricing)
Pros:
-No risk of damage!
-Perfect for leased or owned!
-Unlimited Reusability!
-Competitively Priced!
-Louder exhaust note!
Cons:
NONE!
I will ship WORLDWIDE, additional shipping charges may apply outside the US so PM me for a quote. I can accept PayPal or any major credit cards now! Simply PM me with your email address and I can send you an invoice ASAP!
It really does only take a few minutes to install; below you will find a video showing how simple and quickly this kit can be installed/removed.
At this point Im sure you're ready to see some pictures so here we go.
[IMG]http://ift.tt/1JIc7Fi[/IMG]
If you have any questions pertaining this kit please feel free to PM me and I will get back to you as quickly as possible!
BELOW INSTRUCTIONS ARE FOR THE F80/2 M3/4! The valves disconnect the same way and the kit installs very similarly.
Be sure the valves are in the open position before disconnecting the plugs and installing this kit or your valves will stay shut and be unable to open!
Installation Instructions Below:
This is how you will find your factory wiring (passeneger side of vehicle shown, driver is a mirror image essentially).
[IMG]http://ift.tt/1JIc5NC[/IMG]
In order to disconnect the factory plug you need to reach on top and depress a small lever and it will release and pull back. You can see the small lever you need to push on in my install video above.
This is what it all looks like disconnected.
[IMG]http://ift.tt/1NTQAzM[/IMG]
Next step is to simply install the plug into the valve, here we will be using the male plug provided (shorter of the two). This is done by sliding it in until you feel the latch click and it lock in place. The plug will only fit one way, do not force anything, if it doesn't feel right flip it over and attempt again.
[IMG]http://ift.tt/1NTQyYA[/IMG]
Now that the valve is taken care of we need to tie up the loose connector. First simply slide the female connector (Longer of the two) into the factory plug. This will also only fit one way so do not force anything, just try both ways and you will very clearly feel which is right.
[IMG]http://ift.tt/1NTQAQ2[/IMG]
Now that the wiring is sealed up all that is left to do is use the provided zip ties to keep the wiring from dangling and flapping around. Simply fold the wiring back on itself and tie the two together. I felt that left the plug a little floppy so I folded that back and zip tied it to the wiring to keep everything tight and together. Trim zip ties accordingly once everything is secured.
[IMG]http://ift.tt/1NTQyYC[/IMG]
At this point we are all done and can admire our work. Its nice to enjoy the fun this cheap mod can provide without the risk of damaging sensitive electronic components.
[IMG]http://ift.tt/1NTQyYE[/IMG]
Repeat the same on the other side and you're all done.
F2x Exhaust Valve Delete Kit
Aucun commentaire:
Enregistrer un commentaire