Hello friends! Does this service bulletin apply to F32 435i Coupes?
SI B61 24 14 September 2014 General Electrical Systems Technical Service
PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.
SUBJECT
Service Action: Install Missing CAN Terminating Resistor
MODEL
F82 (M4 Coupe)
SITUATION
The general electrical system functions fail to operate properly. Various erroneous fault codes are stored throughout the vehicle.
CAUSE
The CAN (Controller Area Network) terminating resistor is missing from the vehicle wiring harness near the EKPS (Electric Fuel Pump Control) module.
CORRECTION
Install the missing CAN terminating resistor.
AFFECTED VEHICLES
This Service Action involves 4 Series Coupes produced from March 2014 to July 2014.
First check if a Service Action label with a code number 703 is already attached to the B-pillar.
If a code number 703 has been punched out, the Campaign has already been performed and no further action is necessary.
Vehicles which require this Service Action to be completed will show it as “Open” when checked either in the "Service Menu" of DCSnet (Dealer Communication System) or with the Key Reader.
Thank you and Happy New Year!
Here is the link:
http://ift.tt/1xb2QnB
SI B61 24 14 September 2014 General Electrical Systems Technical Service
PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.
SUBJECT
Service Action: Install Missing CAN Terminating Resistor
MODEL
F82 (M4 Coupe)
SITUATION
The general electrical system functions fail to operate properly. Various erroneous fault codes are stored throughout the vehicle.
CAUSE
The CAN (Controller Area Network) terminating resistor is missing from the vehicle wiring harness near the EKPS (Electric Fuel Pump Control) module.
CORRECTION
Install the missing CAN terminating resistor.
AFFECTED VEHICLES
This Service Action involves 4 Series Coupes produced from March 2014 to July 2014.
First check if a Service Action label with a code number 703 is already attached to the B-pillar.
If a code number 703 has been punched out, the Campaign has already been performed and no further action is necessary.
Vehicles which require this Service Action to be completed will show it as “Open” when checked either in the "Service Menu" of DCSnet (Dealer Communication System) or with the Key Reader.
Thank you and Happy New Year!
Here is the link:
http://ift.tt/1xb2QnB
Aucun commentaire:
Enregistrer un commentaire