I just put everything back together after installing the RB Turbo aftermarket PCV valve (and cap) as well as a BMS oil catch can.
Install went fairly smooth. Had to remove part of the fuel rail to get at the valve but it all went back together without a hitch.
Car started and ran, except now I have the orange Service Engine Soon in my DIC. It was not there before. There are no major errors being thrown, Check Control is all OK.
Any ideas?? Could it be because pressure is now different with a new (and hopefully working better) pcv valve? I didnt unplug any sensors during the install, tho I did unclip them and then put them back; could one of them come loose and cause a SES error? Is it safe to drive as normal?
Install went fairly smooth. Had to remove part of the fuel rail to get at the valve but it all went back together without a hitch.
Car started and ran, except now I have the orange Service Engine Soon in my DIC. It was not there before. There are no major errors being thrown, Check Control is all OK.
Any ideas?? Could it be because pressure is now different with a new (and hopefully working better) pcv valve? I didnt unplug any sensors during the install, tho I did unclip them and then put them back; could one of them come loose and cause a SES error? Is it safe to drive as normal?
Aucun commentaire:
Enregistrer un commentaire